How to Replace Front Strut Shock Assembly 2009-2014 Ford F-150

Buy Now!
New Shock & Spring Assembly from 1AAuto.com
New Shock & Spring Assembly Set from 1AAuto.com

This video shows you how to install new front strut assemblies from TRQ on your 2009-2014 Ford F-150. TRQ Struts are made to fit your vehicle exactly, just like the original part. Struts can wear out as early as 50,000 miles. You should inspect them regularly for leaks or wear. Save time, money, and hassle by replacing an entire strut assembly.

This repair was done on a 2009 Ford F-150 Lariat 5.4L Crew Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2009 Ford F-150
2010 Ford F-150
2011 Ford F-150
2012 Ford F-150
2013 Ford F-150
2014 Ford F-150

Tools you will need:
• Pry Bar
• 10mm Socket
• 13mm Socket
• 15mm Deep Socket
• 15mm Socket
• 18mm Socket
• 21mm Socket
• 27mm socket
• 30mm Socket
• 8mm Socket
• Trim Tool Set
• Locking Pliers
• Torque Wrench
• Bungee Cord
• Copper Anti-Seize
• Gloves
• Safety Glasses
• Floor Jack
• Hammer
• Pole Jack
• Rubber Mallet
• Wheel Chocks

Subscribe:

Check out our playlist:
Ford F150 2009-2014 12th Gen:

⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.